CA3080CA3080
Operational Transconductance
Amplifier (OTA)
Features
- Slew Rate (Unity Gain, Compensated). . . . .
. . .50V/ms
- Adjustable Power Consumption. . . . . . .
10mW to 30mW
- Flexible Supply Voltage Range . . . . . . .
. . . ±2V to ±15V
- Fully Adjustable Gain . . . . . . . . . . .
. . .0 to gmRL Limit
- Tight gM Spread:
- CA3080 . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 2:1
- CA3080A . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 1.6:1
- • Extended gM Linearity . . . . . . . . . .
. . . . . . . . 3 Decades
Applications
- Sample and Hold
- Multiplexer
- Voltage Follower
- Multiplier
- Comparator
Description
The CA3080 and CA3080A types are Gatable-Gain
Blocks which utilize the unique operational-transconductance-amplifier (OTA)
concept described in Application Note ICAN-6668, “Applications of the CA3080 and
CA3080A High-Performance Operational Transconductance Amplifiers”. The CA3080
and CA3080A types have differential input and a single-ended, push-pull, class A
output. In addition, these types have an amplifier bias input which may be used
either for gating or for linear gain control. These types also have a high
output impedance and their transconductance (gM) is directly proportional to the
amplifier bias current (IABC).
The CA3080 and CA3080A types are notable for
their excellent slew rate (50V/ms), which makes them especially useful for
multiplexer and fast unity-gain voltage followers. These types are especially
applicable for multiplexer applications because power is consumed only when the
devices are in the “ON” channel state.
The CA3080A is rated for operation over the
full military-temperature range (-55oC to +125oC) and its characteristics are
specifically controlled for applications such as sample-hold, gain-control,
multiplex, etc. Operational transconductance amplifiers are also useful in
programmable power-switch applications, e.g., as described in Application Note
AN6048, “Some Applications of a Programmable Power Switch/Ampli-fier” (CA3094,
CA3094A, CA3094B).
Pinouts
CA3080 (PDIP, SOIC) TOP VIEW

Schematic Diagram

Absolute Maximum Ratings
- Supply Voltage (Between V+ and V- Terminal).
. . . . . . . . . . . . . 36V
- Differential Input Voltage . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . 5V
- Input Voltage. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . V+ to V
- Input Signal Current . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .1mA
- Amplifier Bias Current (IABC). . . . . . . .
. . . . . . . . . . . . . . . . . . . .2mA
- Power Dissipation. . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 125mW
- Output Short Circuit Duration (Note 1) . . .
. . . . . . . . . . No Limitation
- Junction Temperature. . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . +175oC
- Junction Temperature (Plastic Package) . . .
. . . . . . . . . . . . +150oC
- Lead Temperature (Soldering 10 Sec.). . . .
. . . . . . . . . . . . . +300oC
Operating Conditions
Operating Temperature Range
- CA3080 . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 0oC to +70oC
- CA3080A. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . -55oC to +125oC
- Storage Temperature Range. . . . . . . . . .
. . . . . . . . -65oC to +150oC
Electrical Specifications For Equipment
Design, TA = +25oC, Unless Otherwise Specified

Electrical Specifications Typical Values
Intended Only for Design Guidance, TA = +25oC, Unless Otherwise Specified

Electrical Specifications For Equipment
Design, TA = +25oC, Unless Otherwise Indicated


Electrical Specifications Typical Values
Intended Only for Design Guidance, TA = +25oC, Unless Otherwise Specified

Applications

FIGURE 19. SCHEMATIC DIAGRAM OF
THE CA3080 AND CA3080A IN A UNITY-GAIN VOLTAGE FOLLOWER CONFIGURATION AND
ASSOCIATED WAVEFORM

FIGURE 20. 1,000,000/1
SINGLE-CONTROL FUNCTION GENERATOR - 1MHz TO 1Hz

FIGURE 22. SCHEMATIC DIAGRAM OF
THE CA3080A IN A SAMPLE-HOLD CONFIGUREATION
_GOBACK
Микросхемы Copyright © _BY Radioland - (3402 Прочтено) |